67S1U Circulator

Domestic Hot Water (DHW) Recirculator

  • PFWRC67S1U

    Single Speed, Stainless, Union Connection, Open System, Lay Dim. 5-7/16″

    PFWRC67S1U – 115 Volt, 25 Watts, 0.22 AMPS, 60Hz, 1 Phase

    Max Head: 5 Ft, Max Flow: 6 GPM

    NOTE: This unit MUST be installed with the Power-Flo Pumps “Retro-Fit Valve” PFRFV

    UL Listed and NSF Certified

Description

These Power-Flo circulator pumps are designed to be installed in residential potable domestic hot water systems to provide recirculation (in a RETRO-FIT application where NO dedicated recirculation pipe has been installed) of domestic hot water resulting in “instant” hot water at fixtures throughout the house. This unit is designed to install ON TOP OF THE WATER HEATER on hot water supply side and will connect directly onto the supply nipple on top of the heater. This pump will come equipped with a standard terminal box with 1/2″ FNPT to “Hard wire” direct to 115 VAC AND will come with a 6 ft. long 3 prong electric cord and strain relief connection for “outlet plugin” installations. FOR INDOOR USE ONLY. NOTE: This unit MUST be installed with the Power-Flo pumps “Retro-Fit Valve” (PFRFV).
  • MOTOR: 2 pole, 3600 Rpm, single phase, PSC with Thermal protection
  • LIQUID TEMPERATURE: 32 – 230°F
  • MAX. SYSTEM PRESSURE: 145 PSI
  • INSULATION: Class H
  • VOLUTE: Stainless Steel
  • CONNECTION: 3/4″ M x 3/4″ FNPT
  • POWER CORD: 6 Foot with 3 prong plug
  • ACCESSORIES: PFFP – Digital Timer, PFSOA – Snap-on Aquastat, PFRFV – Retro-Fit Valve (Timer and Aquastat can only be used with the 6 Ft power cord with 3 prong plug).
  • UL listed and NSF Certified
  • WARRANTY: 3 year

Downloads