3/4 HP Sewage Pump

  • PFSWCCC75T_F x300

  • PFSWCPC75201451F10, PFSWCPC75201452F10, PFSWCPC75201451T10, PFSWCPC75201452T10

    3/4Hp, 1750Rpm, 60Hz, 115 & 230Volt, 1 Phase

    2″ Discharge, 2″ Spherical Solids,

    Cast Iron

    PFSWCPC75201451F10 & 2F10 – Vertical Float

    PFSWCPC75201451T10 & 2T10 – Wide Angle Tethered Float

    Max Lift: 20 Ft, Max Flow: 145 GPM

Description

Submersible sewage pump designed for typical raw sewage and typical septic tank/effluent applications.

  • DISCHARGE: 2” NPT, Male, Vertical
  • LIQUID TEMPERATURE: 32 – 131°F
  • MOTOR HOUSING: Cast Iron
  • IMPELLER: Corrosion-resistant, reinforced Thermoplastic
  • PUMP BASE: Cast Iron
  • SHAFT: Stainless Steel
  • HARDWARE: Stainless Steel
  • GASKET: Rubber
  • SEAL: Single mechanical, Carbon/Ceramic/Stainless Steel
  • UPPER BEARING: Single row, ball, oil lubricated
  • LOWER BEARING: Single row, ball, oil lubricated
  • POWER CORD: 115 Volt – SJTW, 16/3 Cord, with Piggy-back plug. 10 ft. long.
  • POWER CORD: 230 Volt – SJTW, 18/3 Cord with Piggy-back plug, 10 ft. long.
  • MOTOR: Energy efficient, Permanent Split Capacitor (PSC), Oil filled, Class B insulation, Continuous duty (water depth must be at least 6″ to prevent motor from overheating), Auto reset thermal overload protector, Circuit requirements; 115V – 20 AMPS, 230V – 10 AMPS
  • WARRANTY: 3 year

Vertical Float: Mechatronic, Normally Open (N/O), reinforced thermoplastic, 115V – SJTW 16/3C, 230V – SJTW 18/3C,  10 FT. cord with Piggy-back plug, On-Off points are adjustable, Attaches to Discharge Piping.

Wide Angle Tethered Float: Mechanical, Normally Open (N/O), reinforced thermoplastic, 115V – SJOW, 16/2C, 230V – SJOW 18/2C, 10 Ft. cord with Piggy-back plug, On point – 16.5″, Off point – 8.7″

Downloads