Pre-Packaged 1/2HP Simplex Sewage Ejector

  • pfsep5010_300

  • PFSEP5010TA, TB, TC & TD

    18″ x 30″ Basin Package w/Structural Foam, (1 Piece or 2), or Steel Cover,

    2″ or 3″ Discharge Pipe, 2″ Vent, 4″ Inlet (Rubber Grommet or Cast Iron Hub),

    2″ or 3″ PVC Compression Style Swing Check Valve, and

    PFSWCPC50181081T10 Sewage Pump – Wide Angle Tethered Float

    1/2Hp, 3450Rpm, 60Hz, 115 Volt, 1 Phase

    2″ Discharge, 2″ Solids, Cast Iron

    Max Lift: 18 Ft, Max Flow: 108 GPM

Description

Simplex sewage ejector systems are ideal for residential, small commercial, light industrial and agricultural liquid waste applications. These systems are designed to collect liquids and solid waste material from lavatories, floor drains, sinks, showers, laundry trays, water closets, etc.

  • BASIN: 18″ Dia. x 30″ Deep (30 U.S. Gallons) Structural Foam
  • INLET: PFSEP5010TA – 4″ Rubber Grommet
    •      PFSEP5010TB – 4″ Rubber Grommet
    •      PFSEP5010TC – 4″ Cast Iron Hub
    •      PFSEP5010TD – 4″ Rubber Grommet
  • BASIN COVER: Gasketed Structural Foam with 2″ Vent & Electrical Grommets
    •       PFSEP5010TA – Two Piece – 2″ Discharge Grommet
    •       PFSEP5010TB – One Piece – 2″ Discharge Grommet
    •       PFSEP5010TC – Two Piece – 2″ Discharge Grommet
    •       PFSEP5010TD – One Piece – 3″ Discharge Grommet
  • DISCHARGE PIPE: Sch40 PVC with Air Bleed Hole
    •       PFSEP5010TA, TB, TC – 2″ x 40″ Lg.,
    •       PFSEP5010TD – 3″ x 34″ lg.,
  • PIPE FITTING: 2″ Male Adapter, Sch40 PVC (TA, TB, TC, TD)
    •        3″ x 2″ PVC Reducer, Sch40 (TD)
  • DISCHARGE VALVE: 2″ PVC, Compression Style Swing Check (TA, TB, TC)
    •        3″ PVC, Compression Style, Check (TD)
  • HARDWARE: Stainless Steel
  • SEWAGE PUMP: PFSWCPC50181081T10 – 1/2Hp, 115 Volt, 1Ph, 3450Rpm, Cast Iron, 10Ft Cord, Wide Angle Tethered Float, Mechanical, N/O, 10Ft. Cord w/Piggy-Back plug, On point – 15.1″, Off point – 6.8″
  • WARRANTY: 3 year

Downloads