Submersible Cutter Pumps

  • Cutter Pump_x300

  • PF4SCF4236, PF4SCF4246, PF4SCF8936, PF4SCF8946, PF4SCF17734, PF4SCF17744, PF4SCF29734, PF4SCF29744

    4.2 Hp & 8.9 Hp, 1150 Rpm, 60 Hz, 230 & 460 Volt, 3 Phase

    17.7 Hp & 29.7 Hp, 1750 Rpm, 60 Hz, 230 & 460 Volt, 3 Phase

    4″ Discharge, Tandem Seal

    Max Flow: 460/525/685/820 GPM, Shut Off: 42/54/94/112 Ft

Description

Severe duty submersible Cutter pumps are designed for un-screened stringy, fiberous raw sewage applications.

  • DISCHARGE: 4” 125 lb, ANSI Flange, Horizontal
  • LIQUID TEMPERATURE: 104°F Continuous
  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30
  • SEAL PLATE: Cast Iron, Class 30
  • IMPELLER/CUTTER CONE: 2 port, enclosed, Cast Iron, spiral cutter integral with impeller, Hardened steel 52/53 Rockwell “C”
  • CUTTER BLADE: Hardened steel 45/47 Rockwell “C”
  • SHAFT: 420 Stainless steel
  • HARDWARE: 300 series Stainless steel
  • PAINT: Air dry enamel
  • SQUARE RINGS: Buna-N
  • SEAL: Tandem Mechanical, Oil Filled reservoir, Upper- Carbon/Ceramic/Buna-N, Lower- Tungsten Carbide/Tungsten Carbide/Buna-N
  • UPPER BEARING: Single row, ball, grease lubricated
  • LOWER BEARING: Double row, ball, grease lubricated
  • POWER CORD: 30Ft, 4G1.5mm², Pressure grommet for sealing
  • SENSOR CORD: 30Ft, 4G1.5mm², Pressure grommet for sealing
  • MOTOR: NEMA B, Air filled, Class F Insulation
  • THREE PHASE: Dual voltage 230/460, Includes overload protection in motor
  • SEAL LEAK SENSOR: Normally Open (N/O), 1 probe design, requires relay in control panel (Included in PF panels)
  • TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)
  • WARRANTY: 1 year

Downloads