1/2 HP Sump / Effluent Pump

  • PFSPCCP50-F_T-x300

  • PFSPCPC5030721F10, PFSPCPC5030721F20, PFSPCPC5030721T10

    1/2Hp, 3450Rpm, 60Hz, 115 Volt, 1 Phase

    1-1/2″ Discharge, 1/4″ Spherical Solids,

    Cast Iron

    PFSPCPC5030721F10 & F20 – Vertical Float

    PFSPCPC5030721T10 – Wide Angle Tethered Float

    Max Lift: 30 Ft, Max Flow: 72 GPM

Description

General purpose pump for residential, light industrial and commercial sump applications.

  • DISCHARGE: 1-1/2” NPT, Male, Vertical, with 1-1/4″ Adapter
  • LIQUID TEMPERATURE: 32 – 77°F
  • MOTOR HOUSING: Cast Iron
  • IMPELLER: Corrosion-resistant, reinforced Thermoplastic
  • PUMP BASE: Cast Iron
  • SHAFT: Stainless Steel
  • HARDWARE: Stainless Steel
  • GASKET: Rubber
  • SEAL: Single mechanical, rubber and stainless steel
  • UPPER BEARING: Single row, ball, oil lubricated
  • LOWER BEARING: Single row, ball, oil lubricated
  • POWER CORD: SJTW, 18/3 Cord, with plug. 10 ft. and 20 ft. long
  • MOTOR: energy efficient, Permanent Split Capacitor (PSC), Oil filled, Class B insulation, Continuous duty (water depth must be at least 6″ to prevent motor from overheating), Auto reset thermal overload protector, Circuit requirements 15 AMP
  • WARRANTY: 3 year

Vertical Float: Mechatronic, Normally Open (N/O), reinforced thermoplastic, SJTW 18/3C, 10 FT or 20 FT., cord with Piggy-back plug, On point – 8.8″, Off point – 4.4″

Wide Angle Tethered Float: Mechanical, Normally Open (N/O), reinforced thermoplastic, SJOW, 18/2C, 10 Ft. cord with Piggy-back plug, On point – 14.6″, Off point – 6.3″

Downloads