Submersible Grinder Pumps

  • PFG lrg grinder_p1x300

  • PFG3022, PFG3062, PFG3032, PFG3042, PFG5022, PFG5062, PFG5032, PFG5042, PFG7532, PFG7542

    3, 5, 7.5 Hp, 3450Rpm, 60Hz,

    230 Volt, 1 Phase,

    208, 230, 460 Volt, 3 Phase,

    2″ Discharge, Double Seal,

    Manual Operation

    Max Flow: 103/103/103 GPM, Shut Off: 84/130/136 Ft

Description

Submersible Grinder Pumps are designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry.

 

DISCHARGE: 2” NPT, Female, Vertical

LIQUID TEMPERATURE: 160°F Intermittent

MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

SEAL PLATE: Cast Iron, Class 30

IMPELLER: 12 vane, vortex, with pump out vanes on back side, Dynamically balanced, ISO G6.3 Cast Iron

SHREDDING RING & CUTTER: Stainless steel

SHAFT & HARDWARE: Stainless steel

PAINT: Air dry enamel

SQUARE RINGS: Buna-N

SEAL: Tandem Double Mechanical, Oil Filled reservoir,   Upper: 1-1/4″ Carbon/Ceramic/Buna-N,   Lower: 1-1/8″ Silicon Carbide/Silicon Carbide/Viton

UPPER BEARING: Single row, ball, oil lubricated

LOWER BEARING: Single row, ball, oil lubricated

POWER CORD: 30Ft, SOW, 10/4 Cord, Pressure grommet for sealing and strain relief

CONTROL CORD: 30Ft, SOW, 18/5 Cord, Pressure grommet for sealing and strain relief

MOTOR: Class F Insulation, Oil Filled, Squirrel Cage Induction

SINGLE PHASE: Capacitor Start / Capacitor Run, Requires starter or control panel which includes the capacitors. Includes overload protection in motor

THREE PHASE: Dual voltage 230/460. Requires overload protection in control panel

SEAL LEAK SENSOR: Two probe design, Normally Open (N/O). Requires relay in control panel (Included in PF panels)

TEMPERATURE SENSOR: Normally Closed (NC). Requires relay in control panel (Included in PF panels)

WARRANTY: 1 year

OPTIONAL: Pump Stand, PF82306

 

 

 

 

Downloads