Submersible Non-Clog Pumps

  • pf8nc_p2x300

  • PF8NC36036, PF8NC36046, PF8NC48046

    36 Hp, 48 Hp, 1150 Rpm, 60 Hz, 230 & 460 Volt, 3 Phase

    8″ Discharge, 3″ Spherical Solids, Double Seal

    Max Flow: 3700/3750 GPM, Shut Off: 60/64 Ft

Description

Submersible Non-Clog Sewage pumps are designed for typical raw sewage applications.

  • DISCHARGE: 8” 125 lb, ANSI Flange, Horizontal
  • LIQUID TEMPERATURE: 104°F Continuous
  • MOTOR HOUSING: Cast Iron, Class 30
  • VOLUTE: Cast Iron, Class 30 with Bronze wear ring
  • IMPELLER: Three vane, enclosed type with pump out vanes on back side, Dynamically balanced, ISO G6.3, Cast Iron, Class 30
  • SHAFT & HARDWARE: Stainless steel
  • SEAL PLATE: Cast Iron, Class 30
  • PAINT: Air dry enamel
  • SQUARE RINGS: Buna-N
  • SEAL: Double Mechanical, 1-7/8″, Oil Filled pressure equalized reservoir, Upper- Carbon/Ceramic/Buna-N, Lower- Silicon Carbide/Silicon Carbide/Buna-N
  • UPPER BEARING: Single row, ball, oil lubricated
  • LOWER BEARING: Double row, ball, oil lubricated
  • POWER CORD: 25Ft, 2/3-3G Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief
  • SENSOR CORD: 25Ft, SOW, 18/5, Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief
  • MOTOR: Class F Insulation, Oil Filled
  • THREE PHASE: 230/460 dual-voltage motor. Requires overload protection to be included in control panel (Included in PF panels)
  • SEAL LEAK SENSOR: Normally Open (N/O), 2 probe design, requires relay in control panel (Included in PF panels)
  • TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)
  • WARRANTY: 1 year

Downloads