Submersible Sewage Pumps

  • pfs411ht fam

  • PFS411HT, PFS411HTCE

    4/10 Hp, 1750Rpm, 60Hz, 200ºF, 115 Volt, 1 Phase

    2″ Discharge, 1/2″ Spherical Solids (with strainer),

    Manual Operation: Optional High Temp. Float

    Max Flow: 90 GPM, Shut Off: 24 Ft

Description

Submersible Non-Clog Sewage pumps are designed for high temperature water and raw sewage applications.

  • DISCHARGE: 2” NPT, Female, Vertical
  • LIQUID TEMPERATURE: 200°F Continuous High Temperature
  • MOTOR HOUSING/ VOLUTE: Cast Iron, Class 30
  • SEAL PLATE: Cast Iron, Class 30
  • IMPELLER: 2 vane open with pump out vanes on back side, Dynamically balanced, Cast Iron, Class 30
  • SHAFT & HARDWARE: Stainless steel
  • PAINT: Industrial grade powder coating
  • SQUARE RINGS: Buna-N
  • SEAL: Inboard, Single mechanical, 5/8″, Oil Filled Chamber, Silicon Carbide/Silicon Carbide/Buna-N with Secondary Exclusion seal
  • UPPER BEARING: Single row, ball, oil lubricated
  • LOWER BEARING: Single row, ball, oil lubricated
  • POWER CORD: 15Ft., SOOW, 14/3 Cord with Piggy-Back plug, Pressure grommet for sealing & strain relief
  • MOTOR: Class H Insulation, Vacuum Pressure Impregnated (VPI), Oil Filled, Squirrel Cage Induction
  • SINGLE PHASE: Permanent Split Capacitor (PSC), Includes overload protection in motor
  • OPTIONAL: 200ºF High Temperature Wide Angle Level Control, Mechanical, with Piggy-Back plug, 15 Ft Cord
  • WARRANTY: 1 year

PFS411HT – STRAINER: Sludge, Bar type, 1/2″ solids through strainer

PFS411HTCE – STRAINER: Sludge, Bar type with 3″ Extended feet. 1/2″ solids through strainer

Downloads