Submersible Sewage Pumps

  • pfse51a_p2-x300

  • PFSE51A

    1/2 Hp,  1750Rpm, 60Hz, 115 Volt, 1 Phase

    2″ Discharge (Optional 3″ Flange), 2″ Spherical Solids,

    Automatic Operation: Pipe Mounted Wide Angle Float

    Max Flow: 160 GPM, Shut Off: 25 Ft

Description

Submersible Sewage pump designed for typical raw sewage applications.

  • DISCHARGE: 2” NPT (Optional 3″), Female, Vertical, Bolt-on Flange
  • LIQUID TEMPERATURE: 104°F Continuous
  • MOTOR HOUSING/VOLUTE: Cast Iron, Class 30
  • IMPELLER: 2 vane, open type, Cast Iron, Class 30
  • SHAFT & HARDWARE: Stainless steel
  • SEAL PLATE: Cast Iron, Class 30
  • PAINT: Industrial grade powder coating
  • O-RINGS: Buna-N
  • SEAL: Inboard, Single mechanical, 5/8″, Oil Filled reservoir, Carbon/Ceramic/Buna-N with secondary exclusion seal
  • UPPER BEARING: Single row, ball, oil lubricated
  • LOWER BEARING: Single row, ball, oil lubricated
  • POWER CORD: 15Ft, SJTOW, Fast disconnect design, 14/3 Cord with Piggy-Back plug
  • MOTOR: Class B Insulation, Oil Filled, Squirrel Cage Induction
  • SINGLE PHASE: Permanent Split Capacitor (PSC), Includes overload protection in motor
  • LEVEL CONTROL: Wide Angle, Mechanical, Pipe Mounted, Normally Open (N/O), 16/2, SJOW cord with Piggy-Back plug, 3.50″ tether, ON-OFF points adjustable
  • WARRANTY: 2 year

Downloads