Designed to reduce domestic, commercial, institutional, and light sewage to a nely ground slurry.

• DISCHARGE: 2” NPT Vertical

• LIQUID TEMPERATURE: 160°F Intermittent

• MOTOR HOUSING, VOLUTE, & SEAL PLATE: Cast Iron, Class 30

• IMPELLER: 12 vane, Vortex with pump out vanes on back side, Dynamically balanced, ISO G6.3, Cast iron

• SHREDDING RING & CUTTER: Stainless steel

• SHAFT & HARDWARE: Stainless steel

• PAINT: Air dry enamel

• SQUARE RINGS: Buna-N

• SEAL: Tandem Double Mechanical, Oil Filled Reservoir

  • Upper - 1.25 inch, Carbon/Ceramic/Buna-N

  • Lower - 1.125 inch, Silicon Carbide/Silicon Carbide/Viton Stainless Hardware

• UPPER BEARING: Single row, bail, oil lubricated

• LOWER BEARING: Single row, bail, oil lubricated

• POWER CORD: 26 Ft. SOW, 10/4 Cord, Pressure Grommet for

• Sealing and Strain Relief

• CONTROL CORD: 26 Ft. SOW, 18/5, 0.47” OD., Cord. Pressure Grommet for Sealing and Strain Relief

• MOTOR: Class F Insulation, Oil Filled, Squirrel cage induction

• THREE PHASE: Dual Voltage 230/460. Requires overload protection in control panel

• SEAL LEAK SENSOR: Two probe design, Normally Open (NO). Requires relay in control panel, (Included in listed panels)

• TEMPERATURE SENSOR: Normally Closed (NC). Requires relay in control panel, (Included in listed panels)

• WARRANTY: 1 year