Submersible Grinder Pumps are designed to reduce domestic, commercial, institutional and light industrial sewage to a finely ground slurry.

• DISCHARGE: 2” NPT, Female, Vertical

• LIQUID TEMPERATURE: 160°F Intermittent

• MOTOR HOUSING/VOLUTE: Cast Iron, Class 30

• SEAL PLATE: Cast Iron, Class 30

• IMPELLER: 12 vane, vortex, with pump out vanes on back side, Dynamically balanced, ISO G6.3 Cast Iron

• SHREDDING RING & CUTTER: Stainless steel

• SHAFT & HARDWARE: Stainless steel

• PAINT: Air dry enamel

• SQUARE RINGS: Buna-N

• SEAL: Tandem Double Mechanical, Oil Filled reservoir,   Upper: 1-1/4″ Carbon/Ceramic/Buna-N,   Lower: 1-1/8″ Silicon Carbide/Silicon Carbide/Viton

• UPPER BEARING: Single row, ball, oil lubricated

• LOWER BEARING: Single row, ball, oil lubricated

• POWER CORD: 30Ft, SOW, 10/4 Cord, Pressure grommet for sealing and strain relief

• CONTROL CORD: 30Ft, SOW, 18/5 Cord, Pressure grommet for sealing and strain relief

• MOTOR: Class F Insulation, Oil Filled, Squirrel Cage Induction

• SINGLE PHASE: Capacitor Start / Capacitor Run, Requires starter or control panel which includes the capacitors. Includes overload protection in motor

• THREE PHASE: Dual voltage 230/460. Requires overload protection in control panel

• SEAL LEAK SENSOR: Two probe design, Normally Open (N/O). Requires relay in control panel (Included in PF panels)

• TEMPERATURE SENSOR: Normally Closed (NC). Requires relay in control panel (Included in PF panels)

• WARRANTY: 1 year

• OPTIONAL: Pump Stand, PF82306