PF4NC7524, 4.5-15HP, 1750 RPM
PF4NC7524
4.5 Hp, 7.5 Hp, 1750 Rpm, 60 Hz, 230 Volt, 1 Phase
4″ Discharge, 3″ Spherical Solids, Double Seal
Max Flow: 600 GPM, Shut Off: 40 Ft
Description
Submersible Solids Handling Sewage pumps are designed for typical raw sewage applications.
DISCHARGE: 4” 125 lb, ANSI Flange, Horizontal
LIQUID TEMPERATURE: 104°F Continuous
MOTOR HOUSING/VOLUTE: Cast Iron, Class 30
IMPELLER: 2 vane, open type with pump out vanes on back side, Dynamically balanced, ISO G6.3, Cast Iron, Class 30
UPPER BEARING: Single row, ball, oil lubricated
LOWER BEARING: Double row, ball, oil lubricated
POWER CORD: 25Ft, SOW, 10/4 Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief
SENSOR CORD: 25Ft, SOW, 18/5, Cord. Epoxy sealed housing with secondary pressure grommet for sealing and strain relief
MOTOR: Class F Insulation, Oil Filled
SINGLE PHASE: Capacitor Start/Capacitor Run. Requires starter or panel which includes capacitors and overload protection. (Included in PF panels)
SEAL LEAK SENSOR: Normally Open (N/O), 2 probe design, requires relay in control panel (Included in PF panels)
TEMPERATURE SENSOR: Normally Closed (N/C), requires relay in control panel (Included in PF panels)
WARRANTY: 1 year
SHAFT & HARDWARE: Stainless steel
SEAL PLATE: Cast Iron, Class 30
PAINT: Air dry enamel
SQUARE RINGS: Buna-N
SEAL: Double Mechanical, 1-1/4″, Oil Filled pressure equalized reservoir, Upper-